• 10g SFP+ Optical Transceiver Multi Mode 300m (PHY-31192-5L2)
  • 10g SFP+ Optical Transceiver Multi Mode 300m (PHY-31192-5L2)
  • 10g SFP+ Optical Transceiver Multi Mode 300m (PHY-31192-5L2)
  • 10g SFP+ Optical Transceiver Multi Mode 300m (PHY-31192-5L2)
  • 10g SFP+ Optical Transceiver Multi Mode 300m (PHY-31192-5L2)
  • 10g SFP+ Optical Transceiver Multi Mode 300m (PHY-31192-5L2)

10g SFP+ Optical Transceiver Multi Mode 300m (PHY-31192-5L2)

Type: Fiber Transceiver
Wiring Devices: Fiber Switch,Router,Network Cark,SDH,Server
Certification: CE, ISO, RoHS
Condition: New
Rate: 10gbps
Interface: LC
Customization:

Contact Supplier

Gold Member Since 2015

Suppliers with verified business licenses

Manufacturer/Factory, Trading Company

Basic Info.

Model NO.
PHY-31192-5L2
Transmission Distance
10km
Transport Package
Unit Packge Size: 238*192*87mm, 10PCS/CTN
Specification
CE/EMC, CE/LVD, FCC Certification
Trademark
PHYNAM
Origin
Dongguan Guangdong China
HS Code
85176219
Production Capacity
500PCS Per Week

Product Description

10g SFP+ SR module Dual Fiber Optical Transceiver Single Mode (PHY-31192-5L1)

Features

10Gb/s serial optical interface compliant to 802.3ae 10GBASE-LR
Electrical interface compliant to SFF-8431 specifications for enhanced 8.5 and 10 Gigabit small form factor pluggable module "SFP+"
850nm  transmitter, PIN photo-detector
2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface for optical transceivers
Operating case temperature:
PHY-31192-5L1, 0 °C to 70°C
Advanced firmware allow customer system encryption information to be stored in transceiver
Cost effective SFP+ solution, enables higher port densities and greater bandwidth
RoHS compliant

10g SFP+ Optical Transceiver Multi Mode 300m (PHY-31192-5L2)

Applications
High-speed storage area networks
Computer cluster cross-connect
Custom high-speed data pipes
1. GENERAL DESCRIPTION
This 1310 nm DFB 10Gigabit SFP+ transceiver is designed to transmit and receive optical data over single mode optical fiber for link length 10km. 
The SFP+ LR module electrical interface is compliant to SFI electrical specifications.  The transmitter input and receiver output impedance is 100 Ohms differential.  Data lines are internally AC coupled.  The module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI.  SFI typically operates over 200 mm of improved FR4 material or up to about 150mmof standard FR4 with one connector.
The transmitter converts 10Gbit/s serial PECL or CML electrical data into serial optical data compliant with the 10GBASE-LR standard.  An open collector compatible Transmit Disable (Tx_Dis) is provided.  A logic "1," or no connection on this pin will disable the laser from transmitting.  A logic "0" on this pin provides normal operation.  The transmitter has an internal automatic power control loop (APC) to ensure constant optical power output across supply voltage and temperature variations.  An open collector compatible Transmit Fault (Tx_Fault) is provided.  TX_Fault is a module output contact that when high, indicates that the module transmitter has detected a fault condition related to laser operation or safety.  The TX_Fault output contact is an open drain/collector and shall be pulled up to the Vcc_Host in the host with a resistor in the range 4.7-10 kΩ.   TX_Disable is a module input contact. When TX_Disable is asserted high or left open, the SFP+ module transmitter output shall be turned off. This contact shall be pulled up to VccT with a 4.7 kΩ to 10 kΩ resistor
The receiver converts 10Gbit/s serial optical data into serial PECL/CML electrical data.  An open collector compatible Loss of Signal is provided.  Rx_LOS when high indicates an optical signal level below that specified in the relevant standard.  The Rx_LOS contact is an open drain/collector output and shall be pulled up to Vcc_Host in the host with a resistor in the range 4.7-10 kΩ, or with an active termination.  Power supply filtering is recommended for both the transmitter and receiver.   The Rx_LOS signal is intended as a preliminary indication to the system in which the SFP+ is installed that the received signal strength is below the specified range. Such an indication typically points to non-installed cables, broken cables, or a disabled, failing or a powered off transmitter at the far end of the cable.

PIN DEFINITION
The SFP+ modules are hot-pluggable.  Hot pluggable refers to plugging in or unplugging a module while the host board is powered.  The SFP+ host connector is a 0.8 mm pitch 20 position right angle improved connector specified by SFF-8083, or stacked connector with equivalent with equivalent electrical performance.   Host PCB contact assignment is shown in Figure 2 and contact definitions are given in Table 2.   SFP+ module contacts mates with the host in the order of ground, power, followed by signal as illustrated by Figure 3 and the contact sequence order listed in Table 2.
10g SFP+ Optical Transceiver Multi Mode 300m (PHY-31192-5L2)
10g SFP+ Optical Transceiver Multi Mode 300m (PHY-31192-5L2)

 
PIN Logic Symbol Name / Description Note
1   VeeT Module Transmitter Ground 1
2 LVTTL-O TX_Fault Module Transmitter Fault  
3 LVTTL-I TX_Dis Transmitter Disable; Turns off transmitter laser output  
4 LVTTL-I/O SDA 2-Wire Serial Interface Data Line 2
5 LVTTL-I SCL 2-Wire Serial Interface Clock 2
6   MOD_DEF0 Module Definition, Grounded in the module  
7 LVTTL-I RS0 Receiver Rate Select  
8 LVTTL-O RX_LOS Receiver Loss of Signal Indication Active LOW  
9 LVTTL-I RS1 Transmitter Rate Select (not used)  
10   VeeR Module Receiver Ground 1
11   VeeR Module Receiver Ground 1
12 CML-O RD- Receiver Inverted Data Output  
13 CML-O RD+ Receiver Data Output (not used)  
14   VeeR Module Receiver Ground 1
15   VccR Module Receiver 3.3 V Supply  
16   VccT Module Receiver 3.3 V Supply  
17   VeeT Module Transmitter Ground 1
18 CML-I TD+ Transmitter Non-Inverted Data Input  
19 CML-I TD- Transmitter Inverted Data Input  
20   VeeT Module Transmitter Ground 1
10g SFP+ Optical Transceiver Multi Mode 300m (PHY-31192-5L2)
10g SFP+ Optical Transceiver Multi Mode 300m (PHY-31192-5L2)
 

Send your message to this supplier

*From:
*To:
avatar Mr. Woody
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now