Gold Member Since 2015
Audited Supplier
Dongguan Phynam Comtech Co., Ltd.

Optical Transceiver, Fiber Optic, Module manufacturer / supplier in China, offering Giga Dual Fiber SFP Optical Transceiver Compatible with Cisco and Huawei (PHY-8524-1LS), 16 Port 10/100/1000Mbps Poe Switch Web Management, 24 Port Gigabit Poe Switch with 2 Fiber Uplink Ports for HD Camera and Ap Power Supply (TS2624GM) and so on.

(/ )

Supplier Homepage Product Optical Transceiver Giga Dual Fiber SFP Optical Transceiver Compatible with Cisco and Huawei (PHY-8524-1LS)

Giga Dual Fiber SFP Optical Transceiver Compatible with Cisco and Huawei (PHY-8524-1LS)

Purchase Qty.:
(Pieces)
10-49 50-99 100+
FOB Unit Price: US $10.5 US $10 US $9.5
Purchase Qty. (Pieces) FOB Unit Price
10-49 US $10.5
50-99 US $10
100+ US $9.5
Get Latest Price
Production Capacity: 500PCS Per Week
Transport Package: Unit Packge Size: 374*232*82mm
Payment Terms: L/C, T/T, D/P, Paypal, Western Union

Request a custom order and have something just for you!

Send Customized Request
Basic Info
  • Model NO.: PHY-8524-1LS
  • Wiring Devices: Fiber Switch,Router,Network Cark,SDH,Server
  • Condition: New
  • Interface: LC
  • Trademark: PHYNAM
  • Origin: Dongguan Guangdong China
  • Type: Fiber Transceiver
  • Certification: CE, ISO, RoHS
  • Rate: 1.25gbps
  • Transmission Distance: 20km,40km,80km
  • Specification: CE/EMC, CE/LVD, FCC Certification
  • HS Code: 85176219
Product Description
Features

l  Up to 1.25 Gbps bi-directional data links
l  Hot-pluggable SFP footprint
l  850nm Oxide VCSEL laser transmitter
l  Duplex LC connector                                       
l  RoHS Compliant and Lead-Free
l  Up to 500m on 50/125μm MMF,300m on 62.5/125μm MMF
l  Metal enclosure, for lower EMI
l  Single power supply 3.3V
l  Low power dissipation
l  Commercial operating temperature range: 0°C to 70°C
 
APPLICATIONS
 
l  1.25 Gbps 1000Base-SX Ethernet
l  Dual Rate 1.063 Gbps Fibre Channel
 
The PHY-8524-1LS Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). They are simultaneously compatible with Gigabit Ethernet as specified in IEEE Std 802.3 and Fibre Channel FC- PI-2 Rev. 7.0. They are RoHS compliant and lead-free per Directive 2002/95/EC
I. Pin Descriptions

PinSymbolName/DescriptionRef.
1VEETTransmitter Ground (Common with Receiver Ground)1
2TFAULTTransmitter Fault. Not supported.
3TDISTransmitter Disable. Laser output disabled on high or open.2
4MOD_DEF(2)Module Definition 2. Data line for Serial ID.3
5MOD_DEF(1)Module Definition 1. Clock line for Serial ID.3
6MOD_DEF(0)Module Definition 0. Grounded within the module.3
7Rate SelectNo connection required
8LOSLoss of Signal indication. Logic 0 indicates normal operation.4
9VEERReceiver Ground (Common with Transmitter Ground)1
10VEERReceiver Ground (Common with Transmitter Ground)1
11VEERReceiver Ground (Common with Transmitter Ground)1
12RD-Receiver Inverted DATA out. AC Coupled
13RD+Receiver Non-inverted DATA out. AC Coupled
14VEERReceiver Ground (Common with Transmitter Ground)1
15VCCRReceiver Power Supply
16VCCTTransmitter Power Supply
17VEETTransmitter Ground (Common with Receiver Ground)1
18TD+Transmitter Non-Inverted DATA in. AC Coupled.
19TD-Transmitter Inverted DATA in. AC Coupled.
20VEETTransmitter Ground (Common with Receiver Ground)
Notes:
1. Circuit ground is internally isolated from chassis ground.
2. Laser output disabled on TDIS >2.0V or open, enabled on TDIS <0.8V.
3. Should be pulled up with 4.7k – 10kohms on host board to a voltage between 2.0V and 3.6V.
MOD_DEF(0) pulls line low to indicate module is plugged in.
4. LOS is open collector output. Should be pulled up with 4.7k – 10kohms on host board to a voltage
between 2.0V and 3.6V. Logic 0 indicates normal operation; logic 1 indicates loss of signal.
 
II. Absolute Maximum Ratings
 
ParameterSymbolMinTypMaxUnitRef.
Maximum Supply VoltageVcc-0.5
4.0V
Storage TemperatureTS-40
85°C
Case Operating TemperatureTA0
70°C
Relative HumidityRH0
85%1

 
Notes:
1. Non condensing.
 
 
 
 
 
 
 
III. Electrical Characteristics (TA = 0 to 70 °C, VCC = 3.0 to 3.6 Volts)
 
ParameterSymbolMinTypMaxUnitRef.
Supply VoltageVcc3.0
3.6V
Supply CurrentIcc
150240mA
Transmitter
Input differential impedanceRin
100
Ω2
Single ended data input swingVin,pp250
1200mV3
Transmit Disable VoltageVD2
VccV4
Transmit Enable VoltageVENVee
Vee+ 0.8V
Receiver
Single ended data output swingVout,pp250450550mV5
Data output rise timetr

175ps6
Data output fall timetf

175ps6
Mask Margin

45%


LOS FaultVLOS fault2
VccHOSTV7
LOS NormalVLOS normVee
Vee+0.5V7
Power Supply RejectionPSR100

mVpp8
Deterministic Jitter ContributionRX Δ DJ

51.7ps9
Total Jitter ContributionRX Δ TJ
<65122.4ps10
 
Notes:
2. Connected directly to TX data input pins. AC coupling from pins into laser driver IC.
3. We recommend <600mV for best EMI performance.
4. Or open circuit.
5. Into 100 ohms differential termination.
6. 20 – 80 %
7. LOS is an open collector output. Should be pulled up with 4.7k – 10k ohms on the host board. Normal operation is logic 0; loss of signal is logic 1. Maximum pull-up voltage is 5.5V.
8. Receiver sensitivity is compliant with power supply sinusoidal modulation of 20 Hz to 1.5 MHz up to specified value applied through the recommended power supply filtering network.
9. Typical peak-to-peak jitter (=6*RMS width of Jitter).
10. Measured with DJ-free data input signal. In actual application, output DJ will be the sum of input DJ and Δ DJ.
IV. Optical Characteristics (TOP = 0 to 70 °C, VCC = 3. 00 to 3.60 Volts)
ParameterSymbolMinTypMaxUnitRef
Transmitter
Output Opt. Pwr: 50 or 62.5 MMFPOUT-9
-3dBm1
Optical Wavelengthλ830
860nm
Spectral Widthσ

0.85nm
Optical Modulation Amplitude @ 1.0625 GbpsOMA156

μW2
Optical Rise/Fall Timetr/ tf
100150ps3
Relative Intensity NoiseRIN

-120dB/Hz
Deterministic Jitter ContributionTX Δ DJ
2056.5ps4
Total Jitter ContributionTX Δ TJ
 <65119ps5
Extinction Ratio @ 1.25 GbpsER9

dB
Mask Margin

45%


Receiver
Receiver Sensitivity = 1.0625 GbpsRxSENS

-20dBm6
Receiver Sensitivity = 1.25 GbpsRxSENS

-20dBm7
Stressed RX sens. =1.0625 Gbps
0.055

mW8
Stressed RX sens. =1.25 Gbps


-13.5dBm9
Average Receiver PowerRxMAX

0dBm
Receiver Elec. 3 dB cutoff freq.


1500MHz
Optical Center WavelengthλC770
860nm
Optical Return Loss
12

dB
LOS De-AssertLOSD

-20dBm
LOS AssertLOSA-30

dBm
LOS Hysteresis
0.5

dB
 
Notes:
1. Class 1 Laser Safety per FDA/CDRH, IEC, and EN60825-1 laser safety standards.
2. Equivalent extinction ratio specification for Fibre Channel. Allows smaller ER at higher average power.
3. Unfiltered, 20-80%. Complies with FC 1x and 2x eye mask when filtered.
4. Measured with DJ-free data input signal. In actual application, output DJ will be the sum of input DJ and Δ DJ.
5. If measured with TJ-free data input signal. In actual application, output TJ will be given by:
 
6. Specifications are for 50 micro-meter or 62.5 micro-meter fiber
7. As measured with 9dB extinction ratio.
8. Measured with conformance signals defined in FC-PI-2 Rev. 7.0 specifications.
9. Measured with conformance signals defined in IEEE 802.3 specifications.
 
V. General Specifications
 
ParameterSymbolMinTypMaxUnitsRef.
Data RateBR
1.062
Gbps1


1.25


Bit Error RateBER

10-12

Fiber Length on 50/125μm MMFL

550
300
m2
 
Fiber Length on 62.5/125μm MMFL

300
150
m2
 
 
Notes:
1. Gigabit Ethernet and 1x, Fibre Channel compatible, per IEEE 802.3 and FC-PI-2 Rev. 7.0
respectively.
2. At 1.0625 Gb/s Fibre Channel and 1.25 Gb/s Gigabit Ethernet data rates.
 
VI. Environmental Specifications
 
PHY-8524-1LS 850nm SFP transceivers have a commercial operating temperature range from 0°C to +70°C case temperature.
 
ParameterSymbolMinTypMaxUnitsRef.
Case Operating TemperatureTop0
70°C
Storage TemperatureTsto-40
85°C
 
 

Send your message to this supplier
Avatar
Mr. Woody
Manager
*From:
To: Mr. Woody
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now