4 Port 10/100/1000Mbps POE extender switch
4GE POE+1GE PD ports
Product Description:
The TS06P-4GPD-AT is a full Gigabit unmanaged POE expander switch, which provides four POE ports and one PD port. The PD port can get power from any 802.3af/at/POE++ device. Among them, port 1-4 follows the 802.3af/at standard and supports maximum power output of 30w. And the POE ports of the switch can automatically detect and supply power to the PD devices that complies with the 802.3af/at standard. Otherwise, there is no power supply output. In addition, the switch supports auto-negotiating traffic control functions and is compatible with terminal devices of 10Mbps, 100Mbps and 1000Mbps.
The TS06P-4GPD-AT adopts plug-and-play design, which eliminates the need for software settings, which greatly facilitates the installation and use of digital monitoring and wireless coverage.
The TS06P-4GPD-AT is usually used to provide power and data transmission for IP cameras, wireless APs, bridges, and IP phones. The switch can get power from POE injector or switch which connect to the PD port.
Product Features:
- Comply with IEEE 802.3, 802.3i, 802.3u, 802.3ab, 802.3x, 802.3q, 802.3af/at protocol.
- 5*10/100/1000Mbps interface, support for auto-negotiation.
- 4*10/100/1000Mbps POE interface, support 802.3af/at standard, maximum 30w power output.
- 1*10/100/1000Mbps 802.3af/at/POE++ PD port which can get power from POE injector and switch.
- Adopt high-speed Store-and-Forward transmission mode.
- Support 9k jumbo frames
- Auto MDI-X function, self-adjusting straight-through line, cross-line connection.
- 2K Mac address table
- One DIP switch supports port isolation setting.
- Port status LEDs
Product Specifications:
Model |
TS06P-4GPD-AT |
Port |
1000M POE |
4 |
1000M PD |
1 |
Performance |
Store and forward |
Support |
Switching Content |
10G |
MAC Table Size |
2K |
Usage environment |
Operating Temperature:-20ºC~60ºC Storage Temperature:-40ºC~80ºC |
Working humidity:10%~90% RH Non-condensing Storage humidity:5%~90% RH Non-condensing |
POE Standard |
IEEE802.3af/at per port maximum 30W |
Power Input |
POE in IEEE802.3af/at MAX 30W AC Input 52V 1.25A(As a POE switch) |
Supported Standards and Protocol |
IEEE 802.3 Ethernet Media Access Control Protocol IEEE 802.3i 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3af/at power supply through Ethernet data line pairs IEEE 802.3x Flow Control IEEE 802.1q VLAN Bridge Operation |
Operation Mode |
Standard sharing, Port isolation (via DIP switch setting) |
Data Transfer Rate |
Ethernet 10Mbps half-duplex, 20Mbps full duplex Fast Ethernet 100Mbps half-duplex, 200Mbps full duplex Gigabit Ethernet 2000Mbps full duplex |
Network Media |
10Base-T:2 pair (Cat3) or above UTP/STP (≤150m) 100Base-TX:2 pair(Cat5)or above UTP/STP(≤150m) 1000Base-T:4 pair Cat5e)or above UTP/STP(≤150m) |
Dimension |
140*80*28mm |
Safety Regulations |
FCC,CE,RoHS-Compliant |