Customization: | Available |
---|---|
Communication Mode: | Full-Duplex & Half-Duplex |
Type: | Ethernet Switch |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Model | S3024P-4SE |
Product name | 4*10G SFP+ uplink 24 Port GIGA Poe smart web switch |
Fixed Port | 24*10/100/1000Base-TX PoE RJ45(Data+power) 4*1G/10G SFP+ |
Reset Key | 1 |
Switch function | 1:DUMP/WEB on/off(enable/disable web management) 2:Port isolation on/off 3:Poe watchdog on/off |
PoE Port | 1-2 port supports PoE IEEE 802.3af/at/poe++/BT MAX 90W 3-24 port supports PoE IEEE 802.3af/at each port 30W |
POE Total Power | ≤375W |
CPU | MIPS-34Kc Up to 800MHz |
DDR | 2G DDR3 1333MHz |
Cache | 12M |
FLASH | 16M |
RAM | 128M |
Bandwidth | 256Gbps |
Packet Forwarding | 92.32Mpps |
MAC Address | 16K |
Network Protocol | IIEEE 802.3 ,IEEE 802.3 i,IEEE 802.3u,IEEE 802.3ab,IEEE 802.3 z,IEEE 802.3x IEEE802.3af/at/poe++/BT |
Port Specification | 10/100/1000BaseT(X)Auto |
Transmission Mode | Store and Forward (full wire speed) |
Transmission Distance | 10BASE-T : Cat3,4,5 UTP (≤250 meter) 100BASE-TX : Cat5 or later UTP (≤100 meter) 1000BASE-TX : Cat6 or later UTP (≤1000 meter) |
LED Indicator | PWR: Power LED SYS:(System LED) 1~24:(Link LED=10/100M Link,1000M=Gigabit Link) 1~24:(PoE LED=PoE on) 25 26:(SFP LED) |
Power | Built-in power AC 100~240V 50/60HZ MAX Max Current 5A Max Power 400W |
Operating Temperature/Humidity | -20~+55°C;5%~90% RH Non coagulation |
Storage Temperature/Humidity | -40~+75°C;5%~95% RH Non coagulation |
Physical size | Product size: 440mm*290mm*45mm Packing size: 515mm*375mm*95mm |
N.W/G.W(kg) | 3.5kg/4.3kg |
Installation type | 1U Rack type, 19 " |
Lightning protection level | 3KV 8/20us; IP30 |
Certificate | CE mark, commercial;CE/LVD EN60950; FCC Part 15 Class B;RoHS; |
Warranty | Whole device for 1 year(Accessories not included) |
Software function list | |
Poe management | Poe port switch |
Poe protocol type configuration | |
Poe port restart | |
Poe log function configuration | |
Poe port status, current, power and voltage display | |
system state | Support system information display |
Support port exception protection display | |
Support port bandwidth usage display | |
Support link aggregation display | |
Support static / dynamic MAC address table display | |
Support Chinese / English language switching | |
network configuration | Support management IP address configuration |
Support system time configuration | |
Port | Support port status, rate and flow control configuration |
Support port mirroring | |
Support port exception protection (BPDU / self ring, broadcast flooding, ACL, DHCP message speed limit, etc.) | |
Support link 8 group aggregation | |
Support IEEE configuration | |
Support mega frame configuration | |
Support port isolation configuration | |
VLAN | Support 4094 VLAN addresses |
Support 802.11Q VLAN, MTU VLAN, terminal VLAN | |
MAC | Support static MAC address table |
Support dynamic MAC address table | |
Support MAC address transition table | |
Survival tree protocol | Support STP/RSTP/MSTP tree protocol |
IGMP | Support IPv4 / IPv6 multicast forwarding |
Support IPv4 / IPv6 static routing | |
Support IPv4 / IPv6 port restrictions | |
IGMP snooping V1 / V2 / V3 supported | |
Security | Support management VLAN |
Support management and maintenance mode selection | |
Q0S | Supports 8 port queues |
Support port priority, cos priority, 802.1p priority and DSCP priority | |
Support port speed limit and exit queue speed limit | |
Equipment diagnosis | Support log function configuration |
Support remote log server configuration | |
Support ping function | |
Support traceroute test | |
Support electrical port test | |
Support optical module information diagnosis | |
Equipment management | Support user configuration |
Support web / TFTP / HTTP firmware upgrade | |
Support profile import and export |