4+2 Port 10/100Mbps Smart Poe Switch Max 250 Meter Transmission

• Customization: Available
• Communication Mode: Full-Duplex & Half-Duplex
• Type: Ethernet Switch
• Model NO.: TS06P-4F-2F
• Transmission Rate: 10/100Mbps
• Ports: ≦8
• Power Pin Assignment: Data Provided Over Pairs Over 1/2and 3/6
• Poe Distance: up to 100m
• Poe Standard: 802.3af, 802.3at, Max 30W Output
• Transfer Rate: 10/100Mbps
• Network: Ethernet
• Performance: Store-and-Forward
• Transport Package: Unit Package Size: 374*232*82mm
• Specification: CE/EMC, CE/LVD, FCC Certification
• Trademark: PHYNAM
• Origin: Dongguan Guangdong China
• HS Code: 85176219
• Production Capacity: 500PCS Per Week

Product Description

 

4 Port 10/100Mbps POE Ethernet switch

TS06P-4F-2F
 

Product Description:
The TS06P-4F-2F is a 10/100Mbps unmanaged POE switch, which provides four DATA+POE ports and two pure data port. Among them, port 1 support HI-POE max 60w output and the 2-4 follows the 802.3af/at standard and supports maximum power output of 30w. The POE ports of the switch can automatically detect and supply power to the PD devices that complies with the 802.3af/at standard. Otherwise, there is no power supply output. In addition, the switch supports auto-negotiating traffic control functions and is compatible with terminal devices of 10Mbps, 100Mbps.
The TS06P-4F-2F is usually used to provide power and data transmission for IP cameras, wireless APs, bridges, and IP phones. For terminal devices that do not support POE, the POE splitter can be used to provide power supply and data transmission.
The TS06P-4F-2F adopts plug-and-play design, which eliminates the need for software settings, which greatly facilitates the installation and use of digital monitoring and wireless coverage. In particular, the switch provides a set of DIP switches for easy switching between shared or port isolation modes. In the port isolation mode, 1-4 ports cannot communicate with each other, only through port 5-6 to output data. This mode can effectively suppress the generation of broadcast storms.


Product Features:

• Ports 1 max 60w POE output
• Support POEdog function,When a port goes down or the response becomes slow, the port can be automatically restarted to reactivate the PD device
• Comply with IEEE 802.3, 802.3i, 802.3u, 802.3x, 802.3q, 802.3af/at  specifications.
• 2*10/100Mbps uplink ports, support for auto-negotiation.
• 4*10/100Mbps POE ports, support 802.3af/at standard, maximum 30w power output.
• internal 80w power supply.
• Adopt Store-and-Forward transmission mode.
• Auto MDI-X function, self-adjusting straight-through line, cross-line connection.
• 2K Mac address table
• One DIP switch supports port isolation setting and max 250m POE transmission(CCTV mode)
• Port status LEDs

Datasheet

Model	TS06P-4F-2F
Port
100M Uplink	2
100M POE	4
Function	Exchange Mechanism	Store-and-forward
	Exchange Capacity	1.6G
	MAC	2K
Environmental	Working Temperature:0-45ºC Storage temperature :-40-+70ºC
Working Humidity :10%-90% RH non-condensing Storage Humidity:5%-90% RH non-condensing
POE	IEEE802.3af/at/HI-POE, MAX 60W(port1), total power budget 80W
power	AC input 100~240V 50~60Hz  internal power supply
Network protocol	IEEE 802.3X IEEE 802.3i 10BASE-TX IEEE 802.3u 100BASE-TX IEEE 802.3af /IEEE 802.3at/HI-POE IEEE 802.3x Flow control
Default Mode	Common switch
Feature	Support VLAN, transmission 250 meter
Speed	Ethernet 10Mbps half-duplex, 20Mbps full-duplex Fast Ethernet 100Mbpshalf-duplex, 200Mbps full-duplex
Network Media	10Base-T: Pair 2 Category 3(cat 3) and above UTP/STP(≤100m) 100Base-TX: Pair 2 Category 5(cat 5) and above UTP/STP(≤100m)
Physical Specifications	products size:190mm*130mm*32mm package size:300mm*175mm*100mm 0.9kg