150W Poe Injector 2.5gbe Works with Gen2 and Gen3

Product Details
Customization: Available
Communication Mode: Full-Duplex & Half-Duplex
Type: Ethernet Switch
Manufacturer/Factory, Trading Company
Gold Member Since 2015

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Registered Capital
500000 RMB
Plant Area
101~500 square meters
  • 150W Poe Injector 2.5gbe Works with Gen2 and Gen3
  • 150W Poe Injector 2.5gbe Works with Gen2 and Gen3
  • 150W Poe Injector 2.5gbe Works with Gen2 and Gen3
  • 150W Poe Injector 2.5gbe Works with Gen2 and Gen3
  • 150W Poe Injector 2.5gbe Works with Gen2 and Gen3
  • 150W Poe Injector 2.5gbe Works with Gen2 and Gen3
Find Similar Products

Basic Info.

Model NO.
EC550-SKV2
Transmission Rate
10/100/1000Mbps
Ports
≦8
Transport Package
Unit Package Size: 532*259*80mm, 5PCS/CTN
Specification
CE/EMC, CE/LVD, FCC Certification
Trademark
POEPLUS
Origin
Dongguan Guangdong China
HS Code
85176219
Production Capacity
500PCS Per Week

Product Description

EC550-SKV2
Dual power input 150W Industrial PoE Injector
 
 
Description
EC550-SKV2 is a reliable IP40 rated Industrial 2.5Gbe passive POE Injector with hardened components rated for extreme and rugged industrial environments. Connect the EC550-SKV2 industrial PoE injector data port to a Non-PoE switch or router, and then run an ethernet cable up to 100 meters (328 ft.) to power a PD device(Pay special attention to the terminal device which have to support the corresponding DC power input, otherwise the device will be damaged). Both DIN-rail and wall mount hardware are optional with the industrial PoE injector.

Features
  1. 24V/48V POE output selectable
  2. IP40 rated 2.5Gbe max 150w POE Injector
  3. Passive POE 1236+ 4578-
  4. Power antenna up to 100m (328 ft.) away
  5. Extreme -40 to 80 °C operating temperature range
  6. Support DC inputs
  7. DIN-rail mount and wall mount accessories optional (DIN in default)
  8. Dual power input, support 12-48Vdc input max 150w input
  9. Overcurrent protection

Typical topology
150W Poe Injector 2.5gbe Works with Gen2 and Gen3
 
Specifications
Model EC550-SKV2
Port 1*RJ45*10/100/1000/2500M Data IN
1*RJ45*10/100/1000/2500M PoE OUT
1* DC IN (2P) power terminals
1* DC 5.08mm (3P) power terminals
Standard IEEE 802.3
IEEE 802.3u
IEEE 802.3ab
DC IN DC(2P):36-48V MAX 5A
DC(3P):12-48V MAX 10A
Boost efficiency 85%-97%(12-48V)
PoE Output 24Vdc/48Vdc selectable
Poe Out Watt MAX 150W(24-48Vdc input); Max 120W(12Vdc input)
Data Pin 1234,5678
PoE Out 1236+ 4578-
Indicator PWR:Power ON
DCIN:DC input(2P)
PoE:POE ON
Transmission 10Base-T: two pairs of Cat3 or higher UTP/STP(≤250m)
100Base-TX: two pairs of Cat5 or higher UTP/STP(≤150m)
1000Base-T: for pairs of Cat5e or higher UTP/STP(≤100m)
2500Base-T: for pairs of Cat5e or higher UTP/STP(≤100m)
Features Plug and play without more configuration management
Reliability:MTBF>100k hours
Lightning Protection 6KV 8/20us;6KV ESD protection
Protect grade IP40
Operation
Environment
Operation Temperature:-30ºC~70ºC
Storage Temperature:-40ºC~85ºC
Operation
Environment
Operation Humidity:10%~90% RH Non coagulation
Storage Humidity:5%~90% RH Non coagulation
Product Size 85*70*32mm(bracket and terminal block not included)
Package size 120*100*59mm
Weight 290g
Package info 80PCS/CTN,510*430*320mm,25kgs/CTN
Warranty 1 year



150W Poe Injector 2.5gbe Works with Gen2 and Gen3150W Poe Injector 2.5gbe Works with Gen2 and Gen3150W Poe Injector 2.5gbe Works with Gen2 and Gen3150W Poe Injector 2.5gbe Works with Gen2 and Gen3150W Poe Injector 2.5gbe Works with Gen2 and Gen3150W Poe Injector 2.5gbe Works with Gen2 and Gen3150W Poe Injector 2.5gbe Works with Gen2 and Gen3150W Poe Injector 2.5gbe Works with Gen2 and Gen3150W Poe Injector 2.5gbe Works with Gen2 and Gen3

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier