24ge+4 10g SFP Plus L2 10gigabit Ethernet Switch

• Communication Mode: Full-Duplex & Half-Duplex
• Type: Ethernet Switch
• Transmission Rate: 10/100/1000Mbps
• Ports: 24
• Transport Package: Carton
• Specification: CE/EMC, CE/LVD, FCC Certification
• Model NO.: S5128G-4SE
• Trademark: PHYNAM
• Origin: Dongguan Guangdong China
• HS Code: 85176219
• Production Capacity: 500PCS Per Week

Product Description

S5128G-4SE 10Gigabit Ethernet Switch
 

 Product Overview

10Gigabit Data Center Switch S5128G-4SE is a layer 2 non-blocking switch with Broadcom chip. Providing 128Gbpsswitching capacity, with 95.232Mpps forwarding performance, L2 / L3 full wire-speed forwarding. Its flexible networking capability ensures the stability of the network and the balance of the load link. With the modular design, it provides 24*10/100/1000M RJ45 ports,4* 10G SFP+ optical ports, 1 Console port, which offers enough bandwidth for data aggregation and data exchange. With high bandwidth and low latency, pipe network.And in order to flexibly respond to the network requirements, users can select appropriate, 10G ports according to their needs. L2 S5128G-4SE  is located in high-density access to the core data and the cloud computer network in the next generation, and this product also can be applied for the core and the aggregation of large Internet cafes, enterprise network and metropolitan area network.

Product Feature
Remarkable Performance
1.With 128Gbps backplane capacity, the industry the highest performance (1U TOR);
2. Hardware routing, the packet forwarding rate of the wire speed layer 3 switching has reached 95.232Mpps, L2 / L3 full speed forwarding;
3. Able to be deployed in the Metropolitan Area Network and provide several last kilometer technology
Safe and Reliable
1. Provide DOS, DDOS, spoofing and virus defense;
2. Support IEEE802.1x, provide port-based user authentication, network shield, safety control, and policy control technology;
3.Restrict the maximum number of  hosts connected with the port, multi-binding Ethernet interface , increasing bandwidth and system redundancy;
4. Powerful ACL, support L2-L4 data filtering;
5. Policy control list and flow regulation.
Convenient Maintenance   
1.Able to be managed via Web, SNMP, CLI, telnet, etc;  
2.Support XModem protocol, use TFTP/ZMODEM for software upgrading and BootRom upgrading;
3.Support SFP+, simultaneously downward compatible XFP;
4. Support flexible port configuration;
5.Enter or exit low-power condition from PHY.
Powerful Flow and Broadcast Management  
1.Automatically detect and control broadcast storm, support IGMP packets detection, effectively limit the flooding of broadcast packets;
2. Support Ethernet interface taking 1M as the step length for rate limiting.
3. Support full duplex mode and half duplex mode flow control;
4. Support IP multicast and QoS
 
Product's Technical Parameters

Product Model	L2 S5128G-4SE
Basic Featrue
Fixed Port	4*10G SFP+ optical ports, 24* 10/100/1000M RJ45 adaptive RJ45 ports
Console Port	1
Backplane Capacity	128Gbps
Packet Forwarding Rate	95.232Mpps
Jumbo Frames	12k bytes
Chip	BCM
Layer	L2
Transfer Mode	Support store-forward mode and cut-through mode
CPU	ARM® Cortex™-A9
MAC Address Table	16K
Packet Buffer	1.5MB
VLAN ID	4K
Flash Memory Capacity	8MB
Memory Capacity	256M
Soft Specification
Security Feature	IP+MAC+PORT+VLAN binding ARP inspection DOS prevention Port protection IP source port protection
VLAN	Port based VLAN 802.1Q VLAN IP based VLAN MAC based VLAN
MAC Address Table	Static MAC address table Dynamic MAC address table
Storm Control	Broadcast suppression Multicast suppression DLF suppression Limiting rate
Flow Control	Half-duplex control based on the back pressure type Full-duplex control based on the PAUSE frame
Port Mirroring	Support port mirroring
Port Management	General setting Port counting Configuring port Port Trunking(Static link aggregation) Port-isolation
QoS	IEEE 802.1Qau Congestion mechanism Each port has 8 transmitting queues mapping 802.1p 8 priority
IP Services	Ping detection DHCP Snooping
Spanning Tree	MSTP(802.1s),STP,RSTP
Multicast Management	IGMP Snooping multicasting packets detection
System Management	Support SNMP v1/v2 Support Console Support TELNET Support WEB interface
Remote Upgrading	Support version upgrading via web Support version upgrading via local
Physical Characteristics
Dimension	440x230x44mm
Characteristic of Power	AC: 110V~260V
Power	≤80W
Indicator	Power indicator, system indicator, connecting / transceiver indicator
Environment Temperature / Humidity	operating temperature: 0°C~50°C (0m~1800m) storage temperature: -40°C~+70°C, relative humidity: 5%RH~95%RH, Non-condensing