L3 10g 48 Ports Network Switch with 4*10g SFP+ Fiber Ports

Product Details
Customization: Available
Communication Mode: Full-Duplex & Half-Duplex
Type: Ethernet Switch
Manufacturer/Factory, Trading Company
Gold Member Since 2015

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Registered Capital
500000 RMB
Plant Area
101~500 square meters
  • L3 10g 48 Ports Network Switch with 4*10g SFP+ Fiber Ports
  • L3 10g 48 Ports Network Switch with 4*10g SFP+ Fiber Ports
  • L3 10g 48 Ports Network Switch with 4*10g SFP+ Fiber Ports
  • L3 10g 48 Ports Network Switch with 4*10g SFP+ Fiber Ports
  • L3 10g 48 Ports Network Switch with 4*10g SFP+ Fiber Ports
  • L3 10g 48 Ports Network Switch with 4*10g SFP+ Fiber Ports
Find Similar Products

Basic Info.

Model NO.
S5348G-4SE
Transmission Rate
10/100/1000Mbps
Ports
≦8
Transport Package
Unit Packge Size: 238*192*87mm, 10PCS/CTN
Specification
CE/EMC, CE/LVD, FCC Certification
Trademark
PHYNAM
Origin
Dongguan Guangdong China
HS Code
85176219
Production Capacity
500PCS Per Week

Product Description

L3 48 Ports network switch with 10G UPlink
 
Model S5348G-4SE
Fixed Port 48*10/100/1000Base-TX
4*10G SFP+
Console Port 1*console port
Reset Key 1
CPU 400MHz ARM® Cortex™-A9
DDR 2G DDR3 1333MHz
Buffer Fully integrated 1.5 MB packet buffer
FLASH 64M
RAM 256M
Bandwidth 512Gbps 
Packet Forwarding 184.64Mpps
MAC Address 16K
Network Protocol IEEE 802.3
IEEE 802.3u 100BASE-TX
IEEE 802.3ab1000BASE-T
IEEE 802.3x
IEEE 802.3z 1000BASE-X
IEEE 802.3ad
IEEE 802.3q ,IEEE 802.3q/p
IEEE 802.1w,IEEE 802.1d ,IEEE 802.1S
STP(Spanning Tree Protocol)
RSTP/MSTP( Rapid Spanning Tree Protocol)
EPPS ring network protocol
EAPS ring network protocol
Port Specification 10/100/1000BaseT(X)Auto
Transmission Mode Store and Forward(full wirespeed)
Transmission Distance 10BASE-T : Cat3,4,5 UTP(≤250 meter)
100BASE-TX : Cat5 or later UTP(≤100 meter)
1000BASE-TX : Cat6 or later UTP(≤1000 meter)
LED Indicator PWR:Power LED
SYS:(System LED)
1~48:(Link LED=10/100M Link,1000M=Gigabit Link)
49 50 51 52:(SFP LED)
Power Built-in power AC 100~240V 50/60HZ MAX
Max Current 0.8A
Max Power 50W
Operating Temperature/Humidity -20~+55°C;5%~90% RH Non coagulation
Storage Temperature/Humidity -40~+75°C;5%~95% RH Non coagulation
Physical size Product size: 440mm*290mm*45mm
Packing size: 515mm*375mm*95mm
N.W/G.W(kg) 3.5kg/4.2kg
Installation  type 1U Rack type, 19 "
Lightning protection level 3KV 8/20us;
IP30
Certificate CE mark, commercial;CE/LVD EN60950;
FCC Part 15 Class B;RoHS;
Warranty Whole device for 1 year(Accessories not included)

Port
Number of Copper Gigabit ports 24-48
Number of Fiber 10G or 1G ports 4
Port Shutdown Support
Port Speed Support autonegtiate, full-1000, full-100, half-100, full-10, half-10
Flow Control support full-duplex IEEE 802.3x, half-duplex back pressure
Storm Control Supports rate limit for broadcast, multicast, and DLF packets
Storm Constrain Support the detection of broadcast packets, multicast packets,
or unicast packets on the port, shutdown the port if the rate is over the threshold.
Port Mirror Support
Port Rate Limit Support port ingress and egress rate limit
Link Aggregation Support manual link aggregation
Support LACP dynamic link aggregation
Supports up to 32 aggregation groups, each group up to 8 ports
Support source MAC, destination MAC, source destination MAC, source IP, destination IP, source destination IP routing strategy
Port Isolate Support
Jumbo Frame Support up to 16KB packet
Redundant Port Support
MAC
MAC Table Capacity 16K
MAC Table Management Support
Forwarding mode Support IVL forwarding mode
Static MAC Address Support
MAC Address Binding Support
MAC Address Filtering Support
MAC Learning Control Control the MAC learning based on port
VLAN
Number of VLANs 4K
802.1q-based VLAN Support
MAC-based VLAN Support
IP-based VLAN Support
Protocol-based VLAN Support
Voice VLAN Support
VLAN Mapping Support 1:1 mapping
QinQ Support basic QinQ
Support flexible QinQ
Reliability
Spanning Tree Protocol Support STP/RSTP/MSTP
Port Loop Detection Support
EAPS Support
ERPS Support G.8032/Y.1344
LLDP Support LLDP & LLDP-MED
UDLD Fully compatible with CISCO's UDLD protocol
VLLP (VRRP Layer-2 Loop Protection) Support, Only used with VRRP
L3
ARP Support static and dynamic ARP
Static Route Support
VLAN Interface Support 32 VLAN interfaces
RIP Support RIP v1/v2
OSPF Support OSPFv2
Policy Route Support
VRRP Support
Multicast
Static Multicast MAC Address Support
IGMP SNOOPING Support IGMP SNOOPING v1/v2/v3
Support IGMP Querier
Support IGMP SNOOPING Filter
MVR Support
GMRP Support
ACL
Standard IP-based ACL Support
Extended IP based ACL Support
MAC IP-based ACL Support
MAC ARP-based ACL Support
ACL Port Filtering Support
Time-based ACL Support
QoS
Port Queue Number 8
Port Queue Scheduling Mode Support WRR,RR,WDRR,SP
Port-based Classification Support
802.1p-based Classification Support
DSCP-based Classification Support
ACL-based Classification Support
QoS Policy Support packets mapping to queue
Support COS or DSCP Remarking
Support rate limits of data flow
Support data flow statistics
Support mirroring of data flow
DHCP
DHCP Client Support
DHCP Snooping Support
DHCP Relay Support
DHCP Server Support
DHCP option 82 Support
Management
CLI  Management Support Console, Telnet and SSH
WEB Management Support HTTP and HTTPS
SNMP Management Support SNMP v1, v2c
Support SNMP TRAP
Support lots of standard and private MIBs
User Management Support multiple user management
Log Management Support local log management
Support SYSLOG
RMON Support RMON 1, 2, 3 and 9 groups
Cluster Management Support NDP
Support NTDP
Support manual and automatic joining of cluster groups
Support cluster unified management
Configuration File Support uploading and downloading configuration file
Upgrade software Support
Clock Management Support local clock management
Support SNTP
Security
Switch Management Security Support enabling and disabling TELNET, WEB and SNMP services
Support TELNET, WEB and SNMP services to bind to standard IP ACLs
Support for limiting the number of TELNET connections
CPU Protection The switch's own security protection prevents large data streams from attacking the switch itself.
AAA Support 802.1x
Support RADIUS
Supports authentication, authorization, and accounting through RADIUS server
Support port-based and MAC-based 802.1x
Support 802.1x guest VLAN
IP MAC Binding Support static configuration of IP, MAC and port binding
DHCP SNOOPING Support dynamic ARP binding to prevent ARP spoofing
Support dynamic IP, MAC and port binding
Support fixed port to connect to DHCP server to prevent private connection to DHCP server
Prevent ARP Spoofing Support manually configuring MAC ARP-based ACL rules to prevent ARP spoofing.
Support the DHCP SNOOPING function. During the process of obtaining an IP address by DHCP, the switch dynamically binds ARP to the port to prevent ARP spoofing.
Debugging
PING Support
TRACEROUTE Support
TELNET Client Support

L3 10g 48 Ports Network Switch with 4*10g SFP+ Fiber PortsL3 10g 48 Ports Network Switch with 4*10g SFP+ Fiber Ports
L3 10g 48 Ports Network Switch with 4*10g SFP+ Fiber PortsL3 10g 48 Ports Network Switch with 4*10g SFP+ Fiber PortsL3 10g 48 Ports Network Switch with 4*10g SFP+ Fiber PortsL3 10g 48 Ports Network Switch with 4*10g SFP+ Fiber Ports

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier