8 Port Poe Switch 10/100m with 2 Data Uplink 120W Power Adapter High Quality Products (TS1008F)

• Customization: Available
• Communication Mode: Full-Duplex & Half-Duplex
• Type: Ethernet Switch
• Model NO.: TS1008F
• Transmission Rate: 10/100Mbps
• Ports: ≦8
• Power Pin Assignment: Data Provided Over Pairs Over 1/2and 3/6
• Poe Distance: up to 100m
• Poe Standard: 802.3af/at
• Network Site: Intermediate Node Routers
• Application: Soho
• Firewall: Without Firewall
• Transfer Rate: 10/100Mbps
• Port Structure: Not Modular
• Network: Ethernet
• Performance: Store-and-Forward
• Transport Package: Unit Packge Size: 374*232*82mm
• Specification: CE/EMC, CE/LVD, FCC Certification
• Trademark: PHYNAM
• Origin: Dongguan Guangdong China
• HS Code: 85176219
• Production Capacity: 500PCS Per Week

Product Description

8 Port Poe Switch 10/100m  with 2 Data Uplink 120w power adapter high quality products (TS1008F)

Overview
The 8 port 10/100Mbps PoE switch with 48V/2A external power, provides a easier installation way for your PoE devices (IP cameras,VoIP,wireless AP,etc.).And it can detect your PoE devices according to PoE standard.So the users do not need to worry about the PoE switch will damage their PoE devices.The max transmission distance is 100 meters with Cat5 cables.Ideally,shorter cable would reduce the power degradation over the cables; with high quality cables also can reduce power loss.Plug & play design make the installation quite easy,users do not need any configuration,which make this PoE switch a very good choice for IP cameras,wireless AP,VoIP users
.

Key features
8 10/100Mbps Auto-Negotiation RJ45 ports support PoE and 2 giga uplink interface 
Complies with IEEE802.3af /at standards
Each port support auto-negotiation-10/20, 100/200Mbps (Fast Ethernet)
Bandwidth 3.6Gbps
Max power for single PoE port is 32W
Supports automatically detect function to protect the system when the system power is overloaded or there is non-PoE device
LED indicators for monitoring power, link,activity and speed
48V/2A external power adapter,power over 12(+) 36(-)
Supports IEEE802.3ax flow control for Full Duplex and back-pressure for Half Duplex mode

Technical Specification                                   

Standard & Protocols	IEEE802.3, 802.3u, 802.3af/at, 802.3x
	CSMA/CD, TCP/IP
Basic Function	Wire-speed Performance MAC Address Auto-Learning and Auto-aging IEEE802.3x flow control for Full-Duplex Mode and back-pressure for Half-Duplex Mode
Power supply	100-240 V, 50/60 Hz,with 48V/2A power adapter
Transfer Method	Store-and-Forward
Interface	8 10/100/Mbps RJ45  poe ports ,2 giga uplink ports
Network Media	10Base-T: UTP category 3, 4, 5 cable (max 100m)   EIA/TIA-568 100Ù STP (maximum 100m) 100Base-Tx: UTP category 5, 5e cable (max 100m)   EIA/TIA-568 100Ù STP (max 100m) 1000Base-T: UTP category 5, 5e cable (max 100m)
Indicators	Power, Link/Act ( 10/100Mbps)
Certificates	FCC, CE, RoHS
Environment	Operating Temperature: 0°C~45°C Storage Temperature: -10°C~70°C Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing
Dimensions	225*121*35 mm
Security Standard	CE/LVD
Warranty	One year
Package content	8 port PoE switch Datasheet Power cord (optional type)

 


Caution :
1) All operation should be provided only by a qualified service technician.
2) Make sure the PDs you connected to the Switch are compliant with IEEE 802.3af.
3) Make sure the power is off before unplugging the power adapter.
4) Makes sure all PoE PDs power consumption is less than total power 
5) Please avoid any heavy thing placed on the Switch.
6) Do not use this product near water, for example, in a wet basement or near a swimming pool.
7) Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.
8) For outdoor use, the Switch itself should be housed inside a
protective enclosure.
9)Cutting power during a firmware upgrade can damage your device.
10)Only use attachments/accessories specified by the manufacturer.
11)Opening the switch or tampering with the warranty sticker can void your warranty. 

Aging Test




Package photo

FAQ
1.What is the warranty on the parts you sell?
All parts sold by YINET meet all of the manufactures specifications and carry one year warranty. Some customized products could carry up to three years warranty.
2.How to repair a broken product?such as POE switch,wireless router and Ethernet switch products
Usually we supply free substitute model for the small value products. and we bear the freight. For Big-ticket items or high value products,Considering the high freight and cost we can supply free parts such as PCBA,power adapter or power supply etc. We can also provide remote guidance.
3.What payment methods do you offer?
We accept payment via T/T, L/C,Western Union, MoneyGram and PayPal;
4. What is your minimum order?
To achieve customers' satisfaction, we accept sample order, even one Piece.