4 Port Poe Repeater with 65W Poe Injector

• Communication Mode: Full-Duplex & Half-Duplex
• Type: Ethernet Switch
• Transmission Rate: 10/100Mbps
• Ports: ≦8
• Trademark: POEplus
• Model NO.: TS06P-4F-2F-PD
• Production Capacity: 1000PCS/Week

Product Description

How  to extend POE network with POE extender and POE injector

In some application scenarios, POE networks need to transport further distances of more than 100 meters. Based on the standard protocol, POEplus USES a combination of 65w injector and 4 ports POE extender.
The POE injector PSE65WI support max 65w POE output, and the TS06P-4F-2F-PD has 1 PD port which can accept max 65w POE input and 4 ports POE output(802.3af/at compliant), it has a pure data uplink port too. The 4 ports POE extender support super CCTV mode, one key setting 250m transmission.
Here is the solution:



Specification of the POE injector:
Main Features
2 port Gigabit Rj45 network, 1GE POE out+1GE data input
Support Spherical camera, Industrial wireless AP etc.
Fluid Control: Full-duplex: IEEE 802.3x, Half-duplex: back pressure.
Auto MDI/MDIX.
Support port lightning protection.
Store-and-forward.
All ports support wire speed switch, jumbo frame transmission.
Plug and play, self-adaption.

Specification

Model	PSE65WI	PSE90WI
Power pin	12+/45+ 36-/78-	12+/45+ 36-/78-
POE out	52V 1.25A	55V 1.63A
Power	65W	90W
POE	IEEE802.3af/at/POE++
Data pin	12364578
Power input	AC 100-240V 50/60HZ
Shell	Metal case
Port	1GE POE output+1GE data input
Function	Plug and Play, without configuration management Under-voltage, over-voltage, over current short circuit protection System Reliability:MTBF>100k hours Comply to EN55022, CLASS BCE&RE
Environmenta	Working Temperature:0ºC~40ºC Storage temperature:-40ºC~80ºC
	Working Humidity:10%~90% RH non-condensing Storage Humidity:5%~90% RH non-condensing
Speed	Ethernet 10Mbps half-duplex, 20Mbps full-duplex Fast Ethernet 100Mbpshalf-duplex, 200Mbps full-duplex Gigabit Ethernet 2000Mbps full-duplex
Network Media	10Base-T: Pair 2 Category 3(cat 3) and above UTP/STP(≤150m) 100Base-TX: Pair 2 Category 5(cat 5) and above UTP/STP(≤150m) 1000Base-T: Pair 4 Category 5(Cat5e) and above UTP/STP(≤150m)
Product Size	182mm*72mm*39mm(L*W*H)
Weight	0.9Kg

Specification of the 4 ports POE extender :

Model	TS06P-4F-2F--PD
Product	6 Port Fast Ethernet PoE Network Extender
PoE  Input port	Supports 1/2(+),3/6(-);4/5(+),7/8(-) MAX Input Power 65W
PoE  Output port	IEEE802.3af/at MAX Output Power30W
Function	N:(Standard normal) V:(Port isolation) S:(Super mode)
Power	1:Default:No Power
Watt	Standby Power Consumption:≤3W; Full-load Power Consumption:≤90W;
DC In	As Network Extender: DC9-57V MAX 0.5A As PoE Network Extender :DC37-57V MAX 0.5A
LED Indicator	P:Power LED V:(Port Isolation LED) S:(Super Mode LED) Port:(Green=Link LED+Orange=PoE LED)
Network Protocol	IEEE 802.3 IEEE 802.3i 10BASE-T IEEE 802.3u100BASE-TX IEEE 802.3x IEEE 802.3af/at
Transmission Mode	Store and Forward(full wirespeed))
Bandwidth	1Gbps
Packet Forwarding	1.15Mpps
MAC Address	1K
Buffer	768K
Transmission Distance	10BASE-T : Cat3,4,5 UTP(≤250 meter) 100BASE-TX : Cat5 or later UTP(150 meter)
Operating Temperature/Humidity	-10~+55°C;5%~90% RH Non coagulation
Storage Temperature/Humidity	-40~+75°C;5%~95% RH Non coagulation
Product size/Packing size(L*W*H)	140mm*80mm*28mm 215mm*175mm*45mm
N.W/G.W(kg)	0.3kg/0.4kg
Installation	Desktop
Lightning protection level	3KV 8/20us; IP30
Certificate	CE mark, commercial;CE/LVD EN60950; FCC Part 15 Class B;RoHS;
Warranty	Whole device for 1 year(Accessories not included)