| Customization: | Available |
|---|---|
| Communication Mode: | Full-Duplex & Half-Duplex |
| Type: | Wired |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| The product model | L2 S5724T 10Gigabit Ethernet Switch |
| Basic characteristics | |
| Fixed port | 24 10/100/1000Base-T Ethernet ports, 4 10G SFP+ ports |
| Backplane bandwidth | 128Gbps |
| Packet forwarding rate | 95.232Mpps |
| Processor | RISC 400MHz |
| Flash memory capacity | 8MB |
| The memory capacity | 128MB |
| Address table | 16K |
| Product characteristics | |
| Spanning tree | Support STP, RSTP, MSTP Support PVST/PVST+ |
| VLAN | Support port-based VLAN Support MAC-based VLAN Support 802.1Q labeled VLAN Support for Super Vlan Support for Private Vlan Support for the GVRP dynamic VLAN configuration Support QinQ and flexible QinQ Support for Voice VLAN |
| Flow control | Based on a standard IEEE 802.3x flow control Using IEEE 802.1Qbb priority flow control Support CAR function |
| Broadcast control | Restraining broadcast storm, stop sending so long as reaching a critical point |
| multicast control | IGMP Snooping multicast message automatic monitoring |
| multicast routing | IGMP v1/v2/v3, MLDv2 PIM-SM, OLINK&PIM-DM DVMRP (Distance Vector Multicast Routing Protocol) GMRP (multicast dynamic registration protocol) |
| Port binding | Each group of a maximum of 8, while support 128 group LACP dynamic or static polymerization |
| Port mirroring | Support based on flow classification mirroring and port mirroring |
| Stacked | Stacked 16 hard, soft stacking 32 Using clustering techniques, with a unified centralized management of IP address to do address resource saving |
| Routing management | Static routing RIP v1/v2, OSPFv2, BEIGRP (compatible with Cisco EIGRP), BGPv4, ISIS, BGP Anti virus intelligent routing function |
| Strategy routing | Support based on IP strategy routing |
| The proxy function | Support Proxy ARP, DNS Proxy |
| Redundancy backup | Support for VRRP, HSRP Hot Standby Router Protocol |
| Characteristics of DHCP | DHCP Server, DHCP Client and support DHCP relay |
| Function of NAT | Support the static or dynamic NAT address translation function |
| Safety characteristics | IEEE 802.1x port certification, PKI certification Port Security (Port Security) function Hardware support for IP ACL ACL ACL, MAC, Vlan Hardware support for port based user IP+MAC+Vlan ID+ user account a variety of factors combined to bind Support IP Source Guard Support WEB interface user authentication Remote RADIUS, TACACS+ certification User classification management and password protection Net shield technology Safety control technology Policy control list |
| Quality of service | IEEE 802.1Qau congestion mechanism Each port 8 send queue mapping 802.1p 8 priority WRED, WFQ, SP and FIFO queue scheduling algorithm Best-Effort Service Differentiated Service Strict Priority Weighted Round Robin First come first served TOS to mark RTS |
| Network management | SNMP v1/v2/v3 RMON (1,2,3,9 group) Telnet WEB interface Support for cluster management Support SSH Support for PDP (compatible with Cisco CDP.) To support the fan, temperature, system log, hierarchical alarm |
| Physical characteristics | |
| Appearance size | 440x230x44(mm) |
| Power characteristic | AC 110-240V adaptive, 47-63Hz, 1A/230V, RPS power hot backup |
| Power | 80W |
| Indicator lamp | Power indicator, indication of system, connecting / transceiver instructions |
| Environment humidity / temperature | 0-50 ºC operation,-40-70 ºC preservation,0-90% no condensation |
){kind=link}