4 Ports 10/100/1000m Poe Extender Repeater Max 60W Input

• Customization: Available
• Communication Mode: Full-Duplex & Half-Duplex
• Type: Ethernet Switch
• Model NO.: TS06P-4G-1G-PD
• Transmission Rate: 10/100/1000Mbps
• Ports: ≦8
• Transport Package: Carton
• Specification: CE/EMC, CE/LVD, FCC Certification
• Trademark: POEplus
• Origin: China
• Production Capacity: 1000PCS/Week

Product Description

How  to extend POE network with POE extender and POE injector

In some application scenarios, POE networks need to transport further distances of more than 100 meters. Based on the standard protocol, POEplus USES a combination of 90w injector and 4 ports POE extender.
The POE injector PSE65WI support max 65w POE output, and the TS06P-4G-1G-PD60 has 1 PD port which can accept max 60w POE input and 4 ports POE output(802.3af/at compliant). T
Here is the solution:



Specification of the POE injector:
Main Features
2 port Gigabit Rj45 network, 1GE POE out+1GE data input
Support Spherical camera, Industrial wireless AP etc.
Fluid Control: Full-duplex: IEEE 802.3x, Half-duplex: back pressure.
Auto MDI/MDIX.
Support port lightning protection.
Store-and-forward.
All ports support wire speed switch, jumbo frame transmission.
Plug and play, self-adaption.

Specification

Model	PSE65WI	PSE90WI
Power pin	12+/45+ 36-/78-	12+/45+ 36-/78-
POE out	52V 1.25A	55V 1.63A
Power	65W	90W
POE	IEEE802.3af/at/POE++
Data pin	12364578
Power input	AC 100-240V 50/60HZ
Shell	Metal case
Port	1GE POE output+1GE data input
Function	Plug and Play, without configuration management Under-voltage, over-voltage, over current short circuit protection System Reliability:MTBF>100k hours Comply to EN55022, CLASS BCE&RE
Environmenta	Working Temperature:0ºC~40ºC Storage temperature:-40ºC~80ºC
	Working Humidity:10%~90% RH non-condensing Storage Humidity:5%~90% RH non-condensing
Speed	Ethernet 10Mbps half-duplex, 20Mbps full-duplex Fast Ethernet 100Mbpshalf-duplex, 200Mbps full-duplex Gigabit Ethernet 2000Mbps full-duplex
Network Media	10Base-T: Pair 2 Category 3(cat 3) and above UTP/STP(≤150m) 100Base-TX: Pair 2 Category 5(cat 5) and above UTP/STP(≤150m) 1000Base-T: Pair 4 Category 5(Cat5e) and above UTP/STP(≤150m)
Product Size	182mm*72mm*39mm(L*W*H)
Weight	0.9Kg

Specification of the 4 ports POE extender :
Product Description:
The TS06P-4GPD60 is a full Gigabit unmanaged POE expander switch, which provides four POE ports and one PD port. The PD port can get power from any 802.3af/at/POE++ device. Among them, port 1-4 follows the 802.3af/at standard and supports maximum power output of 30w. And the POE ports of the switch can automatically detect and supply power to the PD devices that complies with the 802.3af/at standard. Otherwise, there is no power supply output. In addition, the switch supports auto-negotiating traffic control functions and is compatible with terminal devices of 10Mbps, 100Mbps and 1000Mbps.
The TS06P-4GPD-60 adopts plug-and-play design, which eliminates the need for software settings, which greatly facilitates the installation and use of digital monitoring and wireless coverage.
The TS06P-4GPD-60 is usually used to provide power and data transmission for IP cameras, wireless APs, bridges, and IP phones. The switch can get power from POE injector or switch which connect to the PD port.
 


Product Features:

1.    Comply with IEEE 802.3, 802.3i, 802.3u, 802.3ab, 802.3x, 802.3q, 802.3af/at/bt protocol.
2.    5*10/100/1000Mbps interface, support for auto-negotiation.
3.    4*10/100/1000Mbps POE interface, support 802.3af/at standard, maximum 30w power output.
4.    1*10/100/1000Mbps 802.3af/at/bt PD port which can get power from POE injector and switch.
5.    Adopt high-speed Store-and-Forward transmission mode.
6.    Support 9k jumbo frames
7.    Auto MDI-X function, self-adjusting straight-through line, cross-line connection.
8.    2K Mac address table
9.    One DIP switch supports port isolation setting.
10.    Port status LEDs 


Product Specifications:

Model		TS06P-4GPD-60
Port	1000M POE	4
	1000M PD	1
Performance	Store and forward	Support
	Switching Content	10G
	MAC Table Size	2K
Usage environment		Operating Temperature:-20ºC~60ºC Storage Temperature:-40ºC~80ºC
		Working humidity:10%~90% RH Non-condensing Storage humidity:5%~90% RH Non-condensing
POE Standard		IEEE802.3af/at per port maximum 30W
Power Input		POE in MAX 60W AC Input 52V 1.25A(As a POE switch)
Supported Standards and Protocol		IEEE 802.3 Ethernet Media Access Control Protocol IEEE 802.3i 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3af/at power supply through Ethernet data line pairs IEEE 802.3x Flow Control IEEE 802.1q VLAN Bridge Operation
Operation Mode		Standard sharing, Port isolation (via DIP switch setting)
Data Transfer Rate		Ethernet 10Mbps half-duplex, 20Mbps full duplex Fast Ethernet 100Mbps half-duplex, 200Mbps full duplex Gigabit Ethernet 2000Mbps full duplex
Network Media		10Base-T:2 pair (Cat3) or above UTP/STP (≤150m) 100Base-TX:2 pair(Cat5)or above UTP/STP(≤150m) 1000Base-T:4 pair Cat5e)or above UTP/STP(≤150m)
Dimension		140*80*28mm
Safety Regulations		FCC,CE,RoHS-Compliant