24V Passive Poe Switch 24 Ports

• Customization: Available
• Communication Mode: Full-Duplex & Half-Duplex
• Type: Ethernet Switch
• Model NO.: FP2400-24V
• Transmission Rate: 10/100Mbps
• Ports: 24
• Poe Distance: up to 100m
• Poe Standard: 24V Power Output
• Network Site: Intermediate Node Routers
• Transfer Rate: 10/100/1000Mbps
• Firewall: Without Firewall
• Port Structure: Not Modular
• Network: Ethernet Csma/CD
• Performance: Store-and-Forward
• Architecture: Rack Type
• Transport Package: Unit Packge Size: 532*259*80mm
• Specification: CE/EMC, CE/LVD, FCC Certification
• Trademark: PHYNAM
• Origin: Dongguan Guangdong China
• HS Code: 85176219
• Production Capacity: 500PCS Per Week

Product Description

The 24-Port unmanaged PoE Switch, with 24 100Mbit RJ45 ports,2 Gigabit Copper/SFP Combo uplink Port, the TS3024F poe switch reduces equipment and installation costs by delivering data and power over existing Ethernet cables (CAT5 cable)to Power over Ethernet (PoE) enabled devices such as Access Points and IP Cameras.

Boost office efficiency and reduce network congestion with a total switching capacity of 8.8Gbps. LED indicators display device status for easy power management and troubleshooting. An internal power supply reduces clutter and delivers 15.4 Watts to each PoE port. A convenient on/off button is located on the back of the switch. Non-PoE devices can connect to the switch-auto-sensing PoE technology cuts power to non-PoE connected devices. Use PoE Splitter with the TS3024F to install non-PoE devices in remote locations.

Key features
24-Port 10/100Mbps + 2 Gigabit Copper/SFP Combo uplink Port unmanaged PoE Switch
24 -Port supply power to PoE Powered Device
Complies with the IEEE 802.3af /at  standard
Each switch port support auto-negotiation-10/20, 100/200Mbps (Fast Ethernet) , 1000/2000Mbps (Gigabit Ethernet).
Support MAC address auto-learning and auto-aging
Prevents packet loss with back pressure (Half-duplex) and IEEE 802.3x PAUSE frame flow control (Full-duplex)
High performance Store and Forward architecture, broadcast storm control, runt / CRC filtering eliminates erroneous packets to optimize the network bandwidth
Non-blocking switching architecture that forwards and filters packets at full wire-speed for maximum throughput
8.8 Gbps Switching Capacity
On/Off power switch

Specifications
 

Product name	24-ports unmanaged POE switch
Order No.	TS3024F
Network protocols and standards	IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab 1000BASE-T IEEE 802.3z 1000BASE-X IEEE 802.3x Flow Control IEEE 802.3af Power over Ethernet
Power Specifications	Power consumption: maximum 400W PoE Power: 360W Voltage: 100 - 240 VAC, 50 -60 Hz
Network interface	24 10/100M ports (MDI / MDIX adaptive); ports with PoE features (24) 2 10/100/1000M Gigabit copper RJ45 ports (MDI / MDIX adaptive) 2 SFP GBIC fiber module slots
Physical Specifications	Dimensions: 440 x 350x 44 mm Weight: 5.5 kg
Electromagnetic radiation	CE mark, commercial FCC Part 15 Class A VCCI Class A C-Tick
Environmental norms	Operating Temperature: 0 ° - 50 ° C (32 ° - 104 ° F) Storage Temperature: -20 ° - 70 ° C (-4 ° - 158 ° F) Operating Humidity: Maximum relative humidity 90% without condensation Storage humidity: 95% maximum relative humidity, non-condensing Working height: up to 10,000 feet (3,000 meters) Storage altitude: the largest 10,000 feet (3,000 meters)
LEDs	Each device: power light Per port (10/100 and Gigabit): connection speed indicator Per PoE port: PoE power-on LED
Radiation  electromagnetic immunity	EN 55024
Certification	CE, FCC, RoHS
Performance Specifications	Forwarding modes: Store and forward Bandwidth: 8.8 Gbps (non-blocking) network latency: 100 Mbps to 100 Mbps transmission, storage and forwarding mode under a 64-byte frame delay is less than 20 microseconds Buffer memory: 3Mb per system Addressing: 48-bit MAC address the address database size: 8,000 per system MAC address Mean failure interval (MTBF): 300,000 hours (about 34 years)
Warranty	1 year
Package Contents	TS3024F, 24 port POE switch the power cord L rails