24*1000m SFP+6 Port Giga Tx Combo Ports Max 4*10g Ports L3 Network Switch

• Communication Mode: Full-Duplex & Half-Duplex
• Type: Wired
• Transmission Rate: 1000Mbps
• Ports: 16
• Package Size: 56*30*9cm
• Unit Weight: 2.3kg
• Model NO.: 24*1000M SFP
• Application: Enterprise, Soho
• Firewall: Without Firewall
• Transfer Rate: 10gbps
• Port Structure: Modular
• Performance: Line-Rate Router
• Architecture: Crossbar System
• Network: Ethernet Csma/CD
• Transport Package: Carton
• Specification: CE/EMC, CE/LVD, FCC Certification
• Trademark: PHYNAM
• Origin: Dongguan Guangdong China
• HS Code: 8517623210
• Production Capacity: 500PCS Per Week

Product Description

Product overview

Product specification5704 Series 10Gigabit Managed Switches are standard third-layer non-blocking switch. Based on high-performance ASIC chip technology, the modular structure design, which have a capability of multilayer switching and wire-speed routing forwarding. Can be deployed in the metropolitan area network, and provides a few last 1 km technology to gather and core data exchange. At the same time, 5704 Series Switches provide a complete IPv4/IPv6 routing, including tunnel and IP multicast.The user can set all kinds of functions of switch through the Web, SNMP and so on. 5704 Series Switches support 2nd layer and 3rd layer VPN, DOS defense, static routing, RIP, OSPF, BGP, PIM-SM, PIM-DM, DVMRP, NAT, Qos, RSTP, MSTP, VLAN, Port Security, a storm suppression, ACL access control and other functions, which is very suitable for the aggregation application of large-scale network and the core application of medium and small-sized network.

The product model	L3 24+6+4 10Gigabit Ethernet Switch
	Basic characteristics
Fixed port	24 1G optical ports, 6 1G electrical combo  ports
Extensible port	4 extensible 10G ports
Backplane bandwidth	128Gbps
Packet forwarding rate	95.232Mpps
Processor	RISC 400MHz
Flash memory capacity	8MB
The memory capacity	128MB
Address table	32K
	Product characteristics
Spanning tree	Support STP, RSTP, MSTP
	Support PVST/PVST+
VLAN	Support port-based VLAN

 

	Support MAC-based VLAN
	Support 802.1Q labeled VLAN
	Support for Super Vlan
	Support for Private Vlan
	Support for the GVRP dynamic VLAN configuration
	Support QinQ and flexible QinQ
	Support for Voice VLAN
	Based on a standard IEEE 802.3x flow control
Flow control	Using IEEE 802.1Qbb priority flow control
	Support CAR function
Broadcast control	Restraining broadcast storm, stop sending so long as reaching a critical point
multicast control	IGMP Snooping multicast message automatic monitoring
	IGMP v1/v2/v3, MLDv2
multicast routing	PIM-SM, OLINK&PIM-DM
	DVMRP (Distance Vector Multicast Routing Protocol)
	GMRP (multicast dynamic registration protocol)
Port binding	Each group of a maximum of 8, while support 128 group
	LACP dynamic or static polymerization
Port mirroring	Support based on flow classification mirroring and port mirroring
	Stacked 16 hard, soft stacking 32
Stacked	Using clustering techniques, with a unified centralized management of IP address to do address
	resource saving
	Static routing
Routing management	RIP v1/v2, OSPFv2, BEIGRP (compatible with Cisco EIGRP), BGPv4, ISIS, BGP
	Anti virus intelligent routing function
Strategy routing	Support based on IP strategy routing
The proxy function	Support Proxy ARP, DNS Proxy
Redundancy backup	Support for VRRP, HSRP Hot Standby Router Protocol
Characteristics of DHCP	DHCP Server, DHCP Client and support DHCP relay
Function of NAT	Support the static or dynamic NAT address translation function
	IEEE 802.1x port certification, PKI certification
	Port Security (Port Security) function
	Hardware support for IP ACL ACL ACL, MAC, Vlan
	Hardware support for port based user IP+MAC+Vlan ID+ user account a variety of factors combined
Safety characteristics	to bind
	Support IP Source Guard
	Support WEB interface user authentication
	Remote RADIUS, TACACS+ certification
	User classification management and password protection
	Net shield technology

Safety control technology

Policy control list

IEEE 802.1Qau congestion mechanism

Each port 8 send queue mapping 802.1p 8 priority

WRED, WFQ, SP and FIFO queue scheduling algorithm

Best-Effort Service

Differentiated Service
Quality of service
Strict Priority

Weighted Round Robin

First come first served

TOS to mark

RTS

SNMP v1/v2/v3

RMON (1,2,3,9 group)

Telnet

WEB interface
Network management
Support for cluster management

Support SSH

Support for PDP (compatible with Cisco CDP.)

To support the fan, temperature, system log, hierarchical alarm

Physical characteristics
 

Appearance size	442mm × 285mm × 44mm
Power characteristic	AC 110-240V adaptive, 47-63Hz, 1A/230V, RPS power hot backup
Power	80W
Indicator lamp	Power indicator, indication of system, connecting / transceiver instructions
Environment humidity /	0-50 ºC operation,-40-70 ºC preservation,0-90% no condensation
temperature