Industrial Multimode SFP Module

• Customization: Available
• Type: Fiber Transceiver
• Wiring Devices: ODF
• Model NO.: SFP
• Condition: New
• Rate: 1.25gbps
• Medium: Multi Mode,Single Mode
• Transmission Distance: up to 80km
• Transport Package: Unit Package Size: 238*192*87mm, 10PCS/CTN
• Specification: CE/EMC, CE/LVD, FCC Certification
• Trademark: PHYNAM
• Origin: Dongguan Guangdong China
• HS Code: 85176219
• Production Capacity: 1000PCS Per Week

Product Description

 

1.25 Gb/s RoHS Compliant Pluggable
Multi-mode SFP Transceiver

25G 850nm 550m

 

 

Product Features

 

1. Hot-pluggable SFP footprint
2. 850nm VCSEL laser transmitter
3. RoHS compliant and Lead Free
4. Up to 550m on 50/125µm MMF,

500m on 62.5/125µm MMF

1. Metal enclosure for lower EMI
2. Single +3.3V power supply
3. Low power dissipation <600mW
4. Commercial operating temperature range:-40°C to +85°C

 

Applications

 

1. 1.25Gb/s 1000Base-SX Ethernet
2. 1.063Gb/s Fiber Channel

 
 

 

General

 Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). They simultaneously comply with 1.25Gb/s 1000Base-SX Ethernet and1.063Gb/s Fiber Channel. They are RoHS compliant and lead-free.

 

I.  Pin Descriptions
Pin	Symbol	Name/Description		Ref.
1	VeeT	Transmitter Ground  (Common with Receiver Ground)		1
2	TX Fault	Transmitter Fault.
3	TX Disable	Transmitter Disable. Laser output disabled on high or open.		2
4	MOD_DEF(2)	Module Definition 2. Data line for Serial ID.		3
5	MOD_DEF(1)	Module Definition 1. Clock line for Serial ID.		3
6	MOD_DEF(0)	Module Definition 0. Grounded within the module.		3
7	Rate Select	No connection required
8	LOS	Loss of Signal indication. Logic 0 indicates normal operation.		4
9	VeeR	Receiver Ground (Common with Transmitter Ground)		1
10	VeeR	Receiver Ground (Common with Transmitter Ground)		1
11	VeeR	Receiver Ground (Common with Transmitter Ground)		1
12	RD-	Receiver Inverted DATA out.  AC Coupled
13	RD+	Receiver Non-inverted DATA out.  AC Coupled
14	VeeR	Receiver Ground (Common with Transmitter Ground)		1
15	VccR	Receiver Power Supply
16	VccT	Transmitter Power Supply
17	VeeT	Transmitter Ground (Common with Receiver Ground)		1
18	TD+	Transmitter Non-Inverted DATA in. AC Coupled.
19	TD-	Transmitter Inverted DATA in. AC Coupled.
20	VeeT	Transmitter Ground (Common with Receiver Ground)		1

Notes:

1. Circuit ground is internally isolated from chassis ground.
2. Laser output disabled on TX Disable >2.0V or open, enabled on TX Disable<0.8V.
3. Should be pulled up with 4.7k - 10kohms on host board to a voltage between 2.0V and 3.6V.

MOD_DEF(0) pulls line low to indicate module is plugged in.

1. LOS is LVTTL output. Should be pulled up with 4.7k - 10kohms on host board to a voltage between 2.0V and 3.6V. Logic 0 indicates normal operation; logic 1 indicates loss of signal.

 
 
Pinout of Connector Block on Host Board

 

 

II.  Absolute Maximum Ratings
Parameter	Symbol		Min	Typ	Max	Unit	Ref.
Maximum Supply Voltage	Vcc		-0.5		+4.0	V
Storage Temperature	TS		-40		+100	°C
Case Operating Temperature	TOP		0		+70	°C
Relative Humidity	RH		0		85	%	1

 

III.  Electrical Characteristics (TOP=25°C, Vcc=3.3Volts)
Parameter	Symbol	Min	Typ		Max	Unit	Ref.
Supply Voltage	Vcc	3.00			3.60	V
Supply Current	Icc		180		300	mA
Transmitter
Input differential impedance	Rin		100			Ω	2
Single ended data input swing	Vin, pp	250			1200	mV
Transmit Disable Voltage	VD	Vcc - 1.3			Vcc	V
Transmit Enable Voltage	VEN	Vee			Vee+ 0.8	V
Transmit Disable Assert Time					10	us
Receiver
Single ended data output swing	Vout, pp	250			800	mV	3
Data output rise time	tr				175	ps	4
Data output fall time	tf				175	ps	4
LOS Fault	VLOS fault	Vcc - 0.5			VccHOST	V	5
LOS Normal	VLOS norm	Vee			Vee+0.5	V	5
Deterministic Jitter Contribution	RXΔDJ				80	ps	6
Total Jitter Contribution	RXΔTJ				122.4	ps

Notes:

1. Non condensing.
2. AC coupled.
3. Into 100 ohm differential termination.
4. 20 - 80 %
5. LOS is LVTTL. Logic 0 indicates normal operation; logic 1 indicates no signal detected.
6. Measured with DJ-free data input signal. In actual application, output DJ will be the sum of input DJ and ΔDJ.

 
 

IV.  Optical Characteristics (TOP=25°C, Vcc=3.3 Volts)
Parameter	Symbol	Min		Typ	Max	Unit	Ref.
Transmitter
Output Opt. Power	PO	-9		-	-3	dBm	1
Optical Wavelength	λ	830		850	860	nm
Spectral Width	σ	-		-	0.85	nm
Side Mode Suppression Ratio	SMSR	30		-	-	dB
Optical Rise/Fall Time	tr/tf	-		-	175	ps	2
Deterministic Jitter Contribution	TXΔDJ	-		-	0.07	UI	3
Total Jitter Contribution	TXΔTJ	-		-	0.007	UI
Optical Extinction Ratio	ER	9		10	-	dB
Receiver
Average Rx Sensitivity	RSENS	-		-	-20	dBm	4
Maximum Received Power	RXMAX	-2		-	-	dBm
Optical Center Wavelength	λC	770		850	860	nm
LOS De-Assert	LOSD	-		-	-24	dBm
LOS Assert	LOSA	-35		-	-	dBm
LOS Hysteresis		0.5		-	-	dB

 
Notes:

1. Class 1 Laser Safety. 
2. Unfiltered, 20-80%.
3. Measured with DJ-free data input signal .In actual application, output DJ will be the sum of input DJ and ΔDJ.
4. Measured with PRBS 2⁷-1 at 10^-12 BER .

 

V.  General Specifications
Parameter	Symbol		Min	Typ	Max	Units	Ref.
Data Rate	BR		-	-	1250	Mb/sec	1
Bit Error Rate	BER		-	-	10^-12		2
Max. Supported Link Length on 50/125μm MMF @ 1.25G	LMAX		-	-	550	m	3

Notes:

1. 1.25G and 1.063G compliant. 
2. Tested with a PRBS 2⁷-1 data pattern.
3. Dispersion limited per FC-PI-2 Rev. 10

 

VI.  Environmental Specifications

 Commercial Temperature SFP transceivers have an operating temperature range from 0°C to +70°C case temperature.
 

Parameter	Symbol	Min	Typ	Max	Units
Case Operating Temperature	Top	-40		+85	°C
Storage Temperature	Tsto	-40		+100	°C

 

VII.  Mechanical Specifications

Small Form Factor Pluggable (SFP) transceivers are compatible with the dimensions defined by the SFP Multi-Sourcing Agreement (MSA).









AP-S85123-3CDLM

IX.  PCB Layout and Bezel Recommendations