10g Surge Protector Lightning Arrester Poe Arrester 10gbe SPD

• Type: Signal Type Arrester
• Structure: Tube Type Arrester
• Installation: Tandem Arrester
• Application: AC/DC System
• Size: Small
• Operation Voltage: Low Voltage
• Model NO.: A-10GE-POE-48V
• Shape: Cuboid
• Material: Ceramic
• Certification: ROHS
• Brand: Poeplus
• Lightning Level: 6kv
• Voltage: 24V
• Cable: Cat.6
• Transport Package: Box
• Specification: CE/EMC, CE/LVD, FCC Certification
• Trademark: POEPLUS
• Origin: Dongguan Guangdong China

Product Description

Cat6 10 Gigabit Network Surge Protector
Model: A-10GE-48V

 

 

 

The model is designed to protect high-speed communication network from lightning over-voltage, transient over-voltage and static discharge. The protector implements multi-level protection circuit with advanced manufacturing process, and has excellent performance on discharge current, limiting voltage, response time, stability and over-all reliability.
 

FEATURES:

Multi. Protection circuits, Gas-Tube+ TVS technology
Dual protection in Common module and different module
TVS array technology, low capacitance
Multi-Strike Capability

Specification

Model	A-10GE-POE-48V
Electrical Parameter(Network & Power)
Nominal operating voltage Un	48V
Max. continuous operating voltage Uc	57V
Nominal discharge current(8/20µs)In	3kA
Max. discharge current (8/20µs)Imax	5KA
Limiting voltage Up	200V
Line-line (@6kV, 10/700µs)	≤150V
Line-line (@3kA, 8/20µs)	≤150V
Adapt transmission rate	10000Mbps
Insertion loss	≤0.5dB
Protection line	1-8
Response time  tA	1ns
Load current	250mA
Application	Cat. 6
Mechanical characteristics
Dimension	30(H)×87(W)×100(L)mm
Weight per unit	120g
Protection grade	IP20
Working conditions	Temperature: -40 to 85ºC,
	Relative humidity: ≤95%
Standards compliance	CE, FCC, RoHS,ISO9001

INSTALLATION AND MAINTENANCE

1. The SPD should be connected in series between the protected device and the signal/power transmission channel.
2. The input terminal (IN) of the SPD should connect to the signal/power transmission channel, and the output terminal (OUT) of the SPD should connect to the protected device.
3. Connect earthing wire of the SPD to earthing bus-bar of the lightning protection system of the room or building.

No special duty needs to be carried out for maintenance. When problem arises and the SPD is suspected, check the system with SPD taken out of circuit. Should system recover, the SPD shall be regarded as a damaged unit and must be replaced immediately.