Type-C Poe Splitter 10/100Mbps 5V Output

• Customization: Available
• Communication Mode: Full-Duplex & Half-Duplex
• Type: Ethernet Switch
• Model NO.: PE0525L
• Transmission Rate: 10/100Mbps
• Ports: ≦8
• Transport Package: Carton
• Specification: CE/EMC, CE/LVD, FCC Certification
• Trademark: PHYNAM
• Origin: Dongguan Guangdong China
• HS Code: 85176219
• Production Capacity: 500PCS Per Week

Product Description

 

 

Dongguan Phynam ComTech CO.,Limited

Specification 10/100Mbps Active 802.3af/at POE splitter with Type-C connector(PE0525L)
 

1. Overview:
   • PE0525L is a 10/100Mbps isolated POE splitter with Type-C connector which compliant with IEEE802.3af/at standard.
   • Body Size:82*28*23mm,cable length 195mm.
   • Chip:SY56805, standard isolation transformer 38~57V input.
   • POE  protocol:IEEE802.3af /at
   • Transmission rate:10/100Mbps
   • Compliant with passive 48V-57V POE(45+,78- only)
   • POE  power output:10W (5V/2A typical value)
   • isolation voltage:1500V
   • POE  pins:(1,2)+/(3,6)and(4,5)+/(7,8)auto adaptive
   • Data pins(1,2)+/(3,6)
   • power output:Type-c  male
2. Picture and size(mm):                                                                                                                       
                                                                                                                                                                

1. Electrical parameters:

 

Voltage input	Active POE 802.3af/at
Parameters	Minimum	Typical	Max
V-input	38Vdc	51Vdc	57Vdc
V-output	4.95V	5V	5.3V
Current output	1.9A	2A	2.1A
output ripple	200mV Max
Efficiency	85% above
Short circuit protection	Support

 

1. Electrical properties

                                                                                                           (Ta=25ºC)
 

Item		Parameter		Unit
environment:
Work temp.			-10~70	ºC
Storage temp.			-30~85(less than  1 month)	ºC
			-30~80(less than  3 month)	ºC
			-25~75(more than 3 month)	ºC
Storage humidity			5~95	RH
Protection circuit
Maximum input voltage		57.0		V
Minimum input voltage		38.0		V
Discharge protection current		2.35		A
Conversion circuit:
Output voltage (no load)		No pressure drop when no load		5.0V
Output voltage (full load)		Pressure drop is 0.3v		4.98V
Maximum output current		2.1		A
		2(typical)		A
Conversion efficiency		Typ.  ≥85%
transformer		1500		V

5. Material requirements
The contents of this specification meet the requirements of eu RoHS directive, and the content of harmful substances meet the following standards:
 

Harmful substances	mg/kg
Pb	1000
Cd	100
Hg	1000
Cr6+	1000
PBB	1000
PBDE	1000